On Sale! Anritsu MS2726C HandHeld Spectrum Master Analyzer – AAATesters.com
Click for Product Info and Updated Pricing
Anritsu MS2726C Spectrum Analyzers
SKU: 9S72
Anritsu MS2726C Spectrum Master Analyzer
Anritsu’s high performance handheld spectrum analyzer provides the wireless professional the performance needed for the most demanding measurements in harsh RF and physical environments. Whether it is for spectrum monitoring, broadcast proofing, interference analysis, RF and microwave measurements, regulatory compliance, or Wi-Fi and wireless network measurements, the Spectrum Master is the ideal instrument for making fast and reliable measurements.
Anritsu MS2726C
Spectrum and Interference Analyzer Highlights
- Measure: Occupied Bandwidth, Channel Power, ACPR, C/I
- Interference Analyzer: Spectrogram, Signal Strength, RSSI
- Dynamic Range: > 104 dB in 1 Hz RBW
- DANL: –160 dBm in 1 Hz RBW
- Phase Noise: –100 dBc/Hz @ 10 kHz offset at 1 GHz
- Frequency Accuracy: ±25 ppb with GPS On
- 1 Hz to 10 MHz Resolution Bandwidth (RBW)
- Traces: Normal, Max Hold, Min Hold, Average, # of Averages
- Detectors: Peak, Negative, Sample, Quasi-peak, and true RMS
- Markers: 6, each with a Delta Marker, or 1 Reference with 6 Deltas
- Limit Lines: up to 40 segments with one-button envelope creation
- Trace Save-on-Event: crossing limit line or sweep complete
Capabilities and Functional Highlights
- LTE, TD-LTE
- GSM/EDGE
- W-CDMA/HSPA+
- TD-SCDMA/HSPA+
- CDMA, EV-DO
- Fixed, Mobile WiMAX
- AM/FM/SSB Demodulator
- Zero-span IF Output
- Gated Sweep
- GPS tagging of stored traces
- Internal Preamplifier standard
- High Accuracy Power Meter
- 4, 6, 8, 18, 26 GHz USB Sensors
- Channel Scanner
- 8.4 Inch Display
- Burst Detect
- < 5 minute warm-up time
- 2.5 hour battery operation time
- Ethernet/USB Data Transfer
- MST Remote Access Tool
MS2726C
Specifications:
Measurements | |
Smart Measurements | Field Strength (uses antenna calibration tables to measure dBm/m2, dBW/m2, V/m, A/m, Watt/m2, Watt/cm2, or dBmV/m) Occupied Bandwidth (measures 99 % to 1 % power channel of a signal) Channel Power (measures the total power in a specified bandwidth) ACPR (adjacent channel power ratio) AM/FM/SSB Demodulation (wide/narrow FM, upper/lower SSB), (audio out only) C/I (carrier-to-interference ratio) Emission Mask (recall limit lines as emission mask) |
Setup Parameters | |
Frequency | Center/Start/Stop, Span, Frequency Step, Signal Standard, Channel # |
Amplitude | Reference Level (RL), Scale, Attenuation Auto/Level, RL Offset, Pre-Amp On/Off, Detection |
Span | Span, Span Up/Down (1-2-5), Full Span, Zero Span, Last Span |
Bandwidth | RBW, Auto RBW, VBW, Auto VBW, RBW/VBW, Span/RBW |
File | Save, Recall, Delete, Directory Management |
Save/Recall | Setups, Measurements, Limit Lines, Screen Shots JPEG (save only), Save-on-Event |
Save-On-Event | Crossing Limit Line, Sweep Complete, Save-then-Stop, Clear All |
Delete | Selected File, All Measurements, All Mode Files, All Content |
Directory Management | Sort Method (Name/Type/Date), Ascend/Descend, Internal/USB, Copy |
Application Options | Impedance (50 Ω, 75 Ω, Other) |
Sweep Functions | |
Sweep | Single/Continuous, Manual Trigger, Reset, Detection, Minimum Sweep Time, Trigger Type |
Sweep Mode | Fast, Performance, No FFT, Burst Detect |
Detection | Peak, RMS/Avg, Negative, Sample, Quasi-peak |
Triggers | Free Run, External, Video, Delay, Level, Slope, Hysteresis, Holdoff, Force Trigger Once |
Trace Functions | |
Traces | Up to three Traces (A, B, C), View/Blank, Write/Hold, Trace A/B/C Operations |
Trace A Operations | Normal, Max Hold, Min Hold, Average, # of Averages, (always the live trace) |
Trace B Operations | A –> B, B <–> C, Max Hold, Min Hold |
Trace C Operations | A –> C, B <–> C, Max Hold, Min Hold, A – B –> C, B – A –> C, Relative Reference (dB), Scale |
Marker Functions | |
Markers | Markers 1-6 each with a Delta Marker, or Marker 1 Reference with Six Delta Markers, Marker Table (On/Off/Large), All Markers Off |
Marker Types | Style (Fixed/Tracking), Noise Marker, Frequency Counter Marker |
Marker Auto-Position | Peak Search, Next Peak (Right/Left), Peak Threshold %, Set Marker to Channel, Marker Frequency to Center, Delta Marker to Span, Marker to Reference Level |
Marker Table | 1-6 markers frequency and amplitude, plus delta markers frequency offset and amplitude |
Limit Line Functions | |
Limit Lines | Upper/Lower, On/Off, Edit, Move, Envelope, Advanced, Limit Alarm, Default Limit |
Limit Line Edit | Frequency, Amplitude, Add Point, Add Vertical, Delete Point, Next Point Left/Right |
Limit Line Move | To Current Center Frequency, By dB or Hz, To Marker 1, Offset from Marker 1 |
Limit Line Envelope | Create Envelope, Update Amplitude, Number of Points (41), Offset, Shape Square/Slope |
Limit Line Advanced | Type (Absolute/Relative), Mirror, Save/Recall |
Frequency | |
Frequency Range | 9 kHz to 43 GHz (tunable to 0 Hz), Preamp 100 kHz to 43 GHz |
Tuning Resolution | 1 Hz |
Frequency reference | Aging: ±1.0 ppm/10 years Accuracy: ±0.3 ppm (25 °C ±25 °C) + aging |
Auto-sensing External Frequency Reference | 1, 1.2288, 1.544, 2.048, 2.4576, 4.8, 4.9152, 5, 9.8304, 10, 13, 19.6608 MHz |
Frequency Span | 10 Hz to 43 GHz including zero span |
Sweep Time | 10 µs to 600 seconds in zero span |
Sweep Time Accuracy | ±2 % in zero span |
Bandwidth | |
Resolution Bandwidth (RBW) | 1 Hz to 10 MHz in 1–3 sequence ±10 % (–3 dB bandwidth) |
Video Bandwidth (VBW) | 1 Hz to 10 MHz in 1–3 sequence (–3 dB bandwidth) |
RBW with Quasi-Peak Detection | 200 Hz, 9 kHz, 120 kHz (–6 dB bandwidth) |
VBW with Quasi-Peak Detection | Auto VBW is On, RBW/VBW = 1 |
Spectral Purity | |
SSB Phase Noise at 1 GHz | –100 dBc/Hz @ 10 kHz offset from carrier (–104 dBc/Hz typical) –102 dBc/Hz @ 100 kHz offset from carrier (–107 dBc/Hz typical) –107 dBc/Hz @ 1 MHz offset from carrier (–114 dBc/Hz typical) –120 dBc/Hz @ 10 MHz offset from carrier (–129 dBc/Hz typical) |
Amplitude Ranges | |
Dynamic Range | > 104 dB @ 2.4 GHz, 2/3 (TOI-DANL) in 1 Hz RBW |
Measurement Range | DANL to +30 dBm |
Display Range | 1 to 15 dB/div in 1 dB steps, ten divisions displayed |
Reference level range | –150 dBm to +30 dBm |
Attenuator resolution | 0 to 65 dB, 5 dB steps |
Amplitude units | Log Scale Modes: dBm, dBV, dBmv, dBµV Linear Scale Modes: nV, µV, mV, V, kV, nW, µW, mW, W, kW |
Maximum continuous input | +30 dBm Peak, ±50 VDC (≥ 10 dB Attn) +23 dBm Peak, ±50 VDC (< 10 dB Attn) +13 dBm Peak, ±50 VDC (Preamp On) |
Amplitude Accuracy | |
20 °C to 30 °C after 30 minute warm-up | Typical: ±0.5 dB, 100 kHz to 40 GHz Maximum: ±1.3 dB, 100 kHz to 13 GHz; Add ±1.0 dB, 13 GHz to 40 GHz |
–10 °C to 50 °C after 60 minute warm-up | Add ±1.0 dB, 100 kHz to 32 GHz Add ±2.0 dB, 32 GHz to 40 GHz |
Displayed Average Noise Level (DANL) | |
DANL in 1 Hz RBW, 0 dB attenuation | 10 MHz to 4 GHz Preamp Off: –141 dBm Preamp On: –160 dBm > 4 GHz to 9 GHz Preamp Off: –134 dBm Preamp On: –156 dBm > 9 GHz to 13 GHz Preamp Off: –129 dBm Preamp On: –152 dBm > 13 GHz to 20 GHz Preamp Off: –123 dBm Preamp On: –145 dBm > 20 to 32 GHz Preamp Off: –134 dBm Preamp On: –154 dBm > 32 GHz to 40 GHz Preamp Off: –127 dBm Preamp On: –147 dBm |
Spurs | |
Residual Spurs | Preamp Off (RF input terminated): –90 dBm 9 kHz to 13 GHz –85 dBm 13 GHz to 20 GHz –80 dBm 20 GHz to 43 GHz Preamp On (RF input terminated) –100 dBm 1 MHz to 32 GHz –95 dBm 32 GHz to 43 GHz |
Input-Related Spurs | (–30 dBm input, span < 1.7 GHz) –60 dBc, –70 dBc typical |
Third-Order Intercept (TOI) | |
2.4 GHz | +15 dBm |
50 MHz to 20 GHz | +20 dBm typical |
20 GHz to 32 GHz | +15 dBm typical |
32 GHz to 43 GHz | +20 dBm typical |
P1dB | |
< 4 GHz 4 GHz to 20 GHz 20 GHz to 32 GHz 32 GHz to 43 GHz |
+5 dBm typical +12 dBm typical +7 dBm typical +12 dBm typical |
Second Harmonic Distortion | |
50 MHz < 4 GHz > 4 GHz |
–54 dBc –60 dBc typical –75 dBc typical |
VSWR | |
< 20 GHz > 20 GHz to 43 GHz |
1:5:1 typical 2:0:1 typical |
Buy, Sell, New, Used Anritsu MS2726C
Anritsu MS2726C Spec Sheet