On Sale! Anritsu MS2712E HandHeld Spectrum Master Analyzer w/ OPT: 9/31/541/542 – AAATesters.com

Click for Product Info and Updated Pricing

Anritsu MS2712E Spectrum Analyzers

SKU: 9S22

Anritsu MS2712E Spectrum Analyzer
Anritsu introduces its next generation compact handheld Spectrum Analyzers to meet the needs for portability. Whether it is for spectrum monitoring, broadcast proofing, interference analysis, RF and microwave measurements, or Wi-Fi and wireless network measurements, the Spectrum Master is the ideal instrument for making fast and reliable measurements.
Highlights:

  • Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I
  • Interference Analyzer: Spectrogram, Signal Strength, RSSI, Signal ID
  • Dynamic Range: > 95 dB in 10 Hz RBW
  • DANL: -152 dBm in 10 Hz RBW
  • Phase Noise: -100 dBc/Hz max @ 10 kHz offset at 1 GHz
  • Frequency Accuracy: < ±50 ppb with GPS On
  • 2-port Transmission Measurements: High/Low Power
  • Traces: Normal, Max Hold, Min Hold, Average, # of Averages
  • Detectors: Peak, Negative, Sample, Quasi-peak, and true RMS
  • Markers: 6, each with a Delta Marker, or 1 Reference with 6 Deltas
  • Limit Lines: up to 41 segments with one-button envelope creation
  • Trace Save-on-Event: crossing limit line or sweep complete

Anritsu MS2712E


Capabilities:

  •  GSM/EDGE, W-CDMA/HSDPA, TD-SCDMA, CDMA/EV-DO
  • WiMAX-Fixed, Mobile
  • LTE
  • ISDB-T, ISDB-T SFN
  • Store 2000 Traces internally
  • Gated Sweep
  • CW Signal Generator
  • Internal Preamplifier standard
  • Internal Bias-Tee
  • Internal Power Meter
  • High Accuracy Power Meter
  • GPS tagging of saved traces
  • 4, 6, 8, 18 GHz Power Sensors
  • Channel Scanner
  • < 5 minute warm-up time
  • 3 hour battery operation time
  • Touchscreen keyboard
  • USB Data Transfer
  • Master Software Tools


Specifications:

Spectrum Analyzer
Measurements
Smart Measurements Field Strength (uses antenna calibration tables to measure dBm/m2 or dBmV/m)
Occupied Bandwidth (measures 99% to 1% power channel of a signal)
Channel Power (measures the total power in a specified bandwidth)
ACPR (adjacent channel power ratio)
AM/FM/SSB Demodulation (wide/narrow FM, USB and LSB), (audio out only)
C/I (carrier-to-interference ratio)
Setup Parameters
Frequency Center/Start/Stop, Span, Frequency Step, Signal Standard, Channel #, Channel Increment
Amplitude Reference Level (RL), Scale, Attenuation Auto/Level, RL Offset, Pre-Amp On/Off, Detection
Span Span, Span Up/Down (1-2-5), Full Span, Zero Span, Last Span
Bandwidth RBW, Auto RBW, VBW, Auto VBW, RBW/WBW, Span/RBW
File Save, Recall, Delete, Directory Management
Save/Recall Setups, Measurements, Limit Lines, Screen Shots Jpeg (save only), Save-on-Event
Save-on-Event Crossing Limit Line, Sweep Complete, Save-then-Stop, Clear All
Delete Selected File, All Measurements, All Mode Files, All Content
Directory Management Sort Method (Name/Type/Date), Ascend/Descend, Internal/USB, Copy, Format USB
Application Options Bias-Tee (On/Off), Impedance (50 O, 75 O, Other)
Sweep Functions
Sweep Single/Continuous, Manual Trigger, Reset, Detection, Minimum Sweep Time, Trigger Type,
Gated Sweep (see Option 0090)
Detection Peak, RMS, Negative, Sample, Quasi-peak
Triggers Free Run, External, Video, Change Position, Manual
Trace Functions
Traces Up to three Traces (A, B, C), View/Blank, Write/Hold, Trace A/B/C Operations
Trace A Operations Normal, Max Hold, Min Hold, Average, # of Averages, (always the live trace)
Trace B Operations A ? B, B??C, Max Hold, Min Hold
Trace C Operations A ? C, B??C, Max Hold, Min Hold, A – B ? C, B – A ? C, Relative Reference (dB), Scale
Marker Functions
Markers Markers 1-6 each with a Delta Marker, or Marker 1 Reference with Six Delta Markers,
Marker Table (On/Off), All Markers Off
Marker Types Style (Fixed/Tracking), Noise Marker, Frequency Counter Marker
Marker Auto-Position Peak Search, Next Peak (Right/Left), Peak Threshold %, Set Marker to Channel,
Marker Frequency to Center, Delta Marker to Span, Marker to Reference Level
Marker Table 1-6 markers frequency and amplitude plus delta markers frequency amplitude and offset
Limit Line Functions
Limit Lines Upper/Lower, On/Off, Edit, Move, Envelope, Advanced, Limit Alarm, Default Limit
Limit Line Edit Frequency, Amplitude, Add Point, Add Vertical, Delete Point, Next Point Left/Right
Limit Line Move To Current Center Frequency, By dB or Hz, To Marker 1, Offset from Marker 1
Limit Line Envelope Create Envelope, Update Amplitude, Points (41 max), Offset, Shape Square/Slope
Limit Line Advanced Type (Absolute/Relative), Mirror, Save/Recall
Frequency
Frequency Range 100 kHz to 4 GHz
Maximum Continuous Input +26 dBm
Tuning Resolution 1 Hz
Frequency Reference Aging: ±1.0 ppm/year
Accuracy: ±1.5 ppm (25 °C ±25 °C) + aging, < ±50 ppb with GPS On
Frequency Span 10 Hz to 4 GHz including zero span
Sweep Time Minimum 100 ms, 10 µs to 600 seconds in zero span
Sweep Time Accuracy ±2% in zero span
Bandwidth
Resolution Bandwidth (RBW) 10 Hz to 3 MHz in 1ヨ3 sequence ±10% (1 MHz max in zero-span) (ヨ3 dB bandwidth)
Video Bandwidth (VBW) 1 Hz to 3 MHz in 1ヨ3 sequence (ヨ3 dB bandwidth) (auto or manually selectable)
RBW with Quasi-Peak Detection 200 Hz, 9 KHz, 120 kHz (ヨ6 dB bandwidth)
VBW with Quasi-Peak Detection Auto VBW is On, RBW/VBW = 1
Spectral Purity
SSB Phase Noise @ 1 GHz -100 dBc/Hz, -110 dBc/Hz typical @ 10 kHz offset
-105 dBc/Hz, -112 dBc/Hz typical @ 100 kHz offset
-115 dBc/Hz, -121 dBc/Hz typical @ 1 MHz offset
Amplitude Ranges
Dynamic Range >95 dB (2.4 GHz), 2/3 (TOI-DANL) in 10 Hz RBW
Measurement Range DANL to +26 dBm
Display Range 1 to 15 dB/div in 1 dB steps, ten divisions displayed
Reference Level Range -130 dBm to +30 dBm
Attenuator Range 0 to 55 dB in 5 dB steps
Amplitude Units Log Scale Modes: dBm, dBV, dBmv, dBµV
Linear Scale Modes: nV, µV, mV, V, kV, nW, µW, mW, W, kW
Amplitude Accuracy
100 kHz to 4.0 GHz ±1.25 dB, ±0.5 dB typical
>4.0 GHz to 6 GHz ±1.50 dB, ±0.5 dB typical
Displayed Average Noise Level (DANL)
  Preamp Off
(Reference level -20 dBm)
Preamp On
(Reference level -50 dBm)
(RBW Normalized to 1 Hz, 0 dB attenuation) Maximum Typical Maximum Typical
10 MHz to 2.4 GHz -141 dBm -146 dBm -157 dBm -162 dBm
>2.4 GHz to 4 GHz -137 dBm -141 dBm -154 dBm -159 dBm
>4 GHz to 5 GHz -134 dBm -138 dBm -150 dBm -155 dBm
> 5 GHz to 6 GHz -126 dBm -131 dBm -143 dBm -150 dBm
(RBW = 10 Hz, 0 dB attenuation)
10 MHz to 2.4 GHz -131 dBm -136 dBm -147 dBm -152 dBm
>2.4 GHz to 4 GHz -127 dBm -131 dBm -144 dBm -149 dBm
>4 GHz to 5 GHz -124 dBm -128 dBm -140 dBm -145 dBm
> 5 GHz to 6 GHz -116 dBm -121 dBm -133 dBm -140 dBm
Spurs
Residual Spurious <-90 dBm (RF input terminated, 0 dB input attenuation, > 10 MHz)
Input-Related Spurious <-75 dBc (0 dB attenuation, -30 dBm input, span <1.7 GHz, carrier offset >4.5 MHz)
Exceptions, typical <-70 dBc @ <2.5 GHz, with 2072.5 MHz Input
<-68 dBc @ F1-280 MHz with F1 Input
<-70 dBc @ F1 + 190.5 MHz with F1 Input
<-52 dBc @ 7349-2F2 MHz, with F2 Input, where F2 < 2424.5 MHz
<-55 dBc @ 190.5 ± F1/2 MHz, F1 <1 GHz
Third-Order Intercept (TOI)
Preamp Off (-20 dBm tones 100 kHz apart, 10 dB attenuation)
800 MHz +16 dBm
2400 MHz +20 dBm
200-2200 MHz +25 dBm, typical
>2.2 GHz to 5.0 GHz +28 dBm, typical
>5.0 GHz to 6.0 GHz +33 dBm, typical
Second Harmonic Distortion
Preamp Off, 0 dB input attenuation, -30 dBm input
50 MHz -56 dBc
>50 MHz to 200 MHz – -60 dBc, typical
>200 MHz to 3000 MHz -70 dBc, typical
VSWR
2:1, typical

 

10 MHz BW Demod (Option 0009) Required for all signal analyzers except AM/FM/PM Signal Analyzer, Option 509

MS2712E

AM/FM/PM Signal Analyzers (Option 0509)
Measurements
  RF Spectrum
AM/FM/PM
RF Spectrum
AM/FM/PM
Audio Spectrum
(FM/PM)
Audio
Waveform
(AM)
Audio
Waveform
(FM/PM)
Summary
(AM)
Summary
(FM/PM)
Graphic
Display
Power (dBm)
vs. Frequency
Depth (%)
vs. Modulation
Frequency
Deviation
(kHz/rad) vs.
Modulation
Frequency
Depth (%)
vs. Time
Deviation
(kHz/rad)
vs. Time
None None
 
Numerical
Displays
Carrier Power
Carrier Frequency
Occupied
Bandwidth
AM Rate
RMS Depth
(Pk-PK)/2 Depth
SINAD
THD
Distortion/Total
Vrms
FM/PM Rate
RMS Deviation
(Pk-PK)/2
Deviation
SINAD
THD
Distortion/Total
Vrms
AM Rate
RMS Depth
(Pk-PK)/2 Depth
SINAD
THD
Distortion/Total
Vrms
FM/PM Rate
RMS Depth
(Pk-PK)/2 Depth
SINAD
THD
Distortion/Total
Vrms
RMS Depth (AM)
Peak + Depth
Peak ヨ Depth
(Pk-PK)/2 Depth
Carrier Power
Carrier
Frequency
Occupied
Bandwidth
AM Rate
SINAD
THD
Distortion/Total
Vrms
RMS Deviation
(FM/PM)
Peak + Depth
Peak ヨ Depth
(Pk-PK)/2 Depth
Carrier Power
Carrier
Frequency
Occupied
Bandwidth
AM Rate
SINAD
THD
Distortion/Total
Vrms
Setup Parameters Center Freq, Span, Freq Step, Signal Standard, Channel, Channel Increment,
Set Carrier Freq
Amplitude Scale, Power Offset, Adjust Range
Setup Demod Type (AM, FM, PM), IFBW, Auto IFBW
Measurements RF Spectrum AM/FM/PM, Audio Spectrum (AM/FM/PM),
Audio Waveform (AM/FM/PM), Summary (AM/FM/PM)
Marker On/Off, Delta, Peak Search, Marker Freq to Center, Marker to Ref Lvl, Marker Table,
All Markers Off
Specifications
AM Modulation Rate: ±1 Hz (<100 Hz), ±2% (>100 Hz)
Depth: ±5% for (Modulation rates 10 Hz to 100 kHz)
FM Modulation Rate: ±1 Hz (<100 Hz); ±2% (100 Hz to 100 kHz)
Deviation Accuracy: ±5% (100 Hz to 100 kHz)
PM Modulation Rate: ±1 Hz (<100 Hz); ±2% (100 Hz to 100 Hz)
Deviation Accuracy: ±5% (deviation 0 to 93 Rad, rate 10 Hz to 5 kHz)
IF bandwidth 1 to 300 kHz in 1-3 sequence
Frequency Span RF Spectrum: 10 kHz to 10 MHz
Audio Spectrum: 2, 5, 10, 20 kHz
RBW/VBW 30
Span/RBW 100
Sweep time 50 µs to 50 ms (Audio Waveform)

Buy, Sell, New, Used Anritsu MS2712E
Anritsu MS2712E Spec Sheet

On Sale! Anritsu MP1800A Signal Quality Analyzer Mainframe – AAATesters.com

Click for Product Info and Updated Pricing

Anritsu MP1800A Spectrum Analyzers

SKU: 9S137

Anritsu MP1800A Signal Quality Analyzer

High Quality Instrument Provides Highly Accurate Results

Anritsu’s Signal Quality Analyzer (MP1800A) incorporates a Pulse Pattern Generator (PPG) module for generating the highest-quality, highest-amplitude signals in the industry, as well as an Error Detector (ED) module with the highest input sensitivity available.

The number of channels per MP1800A-series PPG or ED module can be selected from 1ch, 2ch or 4ch, supporting multichannel synchronization for up to 8 channels at 32 Gbit/s. As a result, each channel of AOC, CFP, CXP, QSFP+, etc., modules can be measured simultaneously, enabling crosstalk and skew tolerance evaluation tests.

Anritsu MP1800A


The MP1800A PPG modules offer outputs up to 3.5 Vp-p, supporting the evaluation of modulators, such as EA and EML. In addition to generating IEEE and ITU-T burst and auxiliary signals for evaluating E-PON, G-PON, and 10GE-PON optical modules, the product’s automated generation of burst data and auxiliary signal output timings shortens evaluation times and improves evaluation quality.

Complete 32G Jitter Testing with Clock Recovery in One Box

Anritsu’s MP1800A with Low-Intrinsic Jitter PPG, 4TAP Emphasis, High-Sensitivity ED, Equalizer for Eye Opening compensation, and automatic measurement software is the ideal total solution for Jitter Tolerance tests.

Various types of jitter, such as SJ, RJ, BUJ, SSC can be generated using the built-in jitter modulation source. The Jitter Modulator generates wide-amplitude SJ up to 1 UI at a Jitter Frequency of 250 MHz, ensuring sufficient margin for receiver Jitter Tolerance tests. Additionally, the Intrinsic Jitter of 275 fs rms (nominal) is extremely low, not only when Jitter modulation is OFF but also when 0 UI is set at Jitter ON, ensuring accurate measurements even at low Jitter amplitudes.

Combining the MP1800A with the 4Tap Emphasis (MP1825B) supports the generation of pre-emphasis for high-speed interconnect standards up to 32.1 Gbit/s, such as CEI-28G, 32G Fibre Channel, and InfiniBand EDR (26G). Each tap can be changed independently assuring accurate pre-emphasis. Positioning the instrument as an external remote head, as close as possible to the DUT, minimizes the impact of signal degradation due to cable-loss and ISI, thus maintaining the highest signal quality at the DUT interface.

The ED module has a high sensitivity of just 10 mV as well as high-speed auto-adjustment of 1 second or less (auto-detects threshold level and phase point), supporting accurate and efficient measurement of low-output-amplitude devices, such as AOCs. Installing the Clock Recovery option enables stress jitter tolerance tests of SERDES with different Tx and Rx clocks and BER measurements of clock-less devices such as AOC in one box.

When used in combination with the High Sensitivity ED (MU183040B/41B) the Passive Linear Equalizers (J1621A/J1622A) enable BER and Jitter Tolerance testing of PHY devices with low EYE openings. The equalizers compensate for printed circuit board (PCB) trace loss and improve EYE opening, thus minimizing the impact of high frequency transmission line distortion.

Ultra High-Speed Signal Generation and BER Measurement

The MP1800A can be configured to generate the high quality, low S/N, 4PAM and 8PAM data signals required for the characterization of high-speed backplanes and 400 GbE interfaces using the 4PAM/8PAM Converter (MZ1834A/MZ1838A). The bit error rates of three 4 PAM eye patterns can be measured simultaneously. The MP1800A is the ideal platform for accurate BER measurements of 4 PAM signals using the long-memory programmable pattern function and error-mask function for filtering out unwanted errors.

With the ability to synchronize up to four MP1800A Signal Quality Analyzer units, only Anritsu supports the configuration of an ultra-high-speed transmission test system up to 1 Tbit/s with multi-channel synchronization signals, such as Quad DP-16QAM and Dual DP-64QAM.

MP1800A

Features:

  • Highly expandable, plug-in, modular design bit error rate tester (BERT)
  • Bit Error Rate test from 0.1 Gbit/s to 32.1 Gbit/s; 64.2 Gbit/s with external MUX/DeMUX
  • Supports signal integrity analysis for a variety of 100G+ applications
    • High speed backplane and interconnect
    • High speed chip/device
    • Active optical cable
    • Optical transceiver modules
  • High-quality (12 ps rise/fall time) and low-jitter (8 ps p-p) PPG waveform, up to 3.5 Vp-p
  • Jitter tolerance test up to 32.1 Gbit/s
    • SJ up to 2000 UI. High modulation frequency SJ up to 1 UI at 250 MHz
    • Support generation of dual tone SJ, RJ, BUJ, and SSC
    • Half Period Jitter (Even/Odd Jitter)
  • Ultra high sensitivity Error Detector (10 mV typical) with embedded clock recovery
  • 1 Tbit/s Next Gen. High-Speed Transmission Testing (32G x 32ch)

 

Specifications:

Number of slots 6 slots
LCD Display 8.4-inch Color TFT, 800×600 pixels
Peripheral Interface VGA out (SVGA), USB 1.1 (3 ports)
Remote Interface GPIB [MP1800A-001], LAN (2 ports) [MP1800A-002]
Dimensions and Mass 320 (W) × 177 (H) × 450 (D) mm, ≤13 kg (without modules)

Buy, Sell, New, Used Anritsu MP1800A

On Sale! Anritsu MS2721A HandHeld Spectrum Master Analyzer – AAATesters.com

Click for Product Info and Updated Pricing

Anritsu MS2721A Spectrum Analyzers

SKU: 9S45

Anritsu MS2721A HandHeld Spectrum Master Analyzer w/ Option 25: Interference Analyzer

Frequency Range: 100 kHz to 7.1 GHz

Includes Hard Carrying Case & Accessories As Listed

Anritsu MS2721A

MS2721

Anritsu MS2721A MS-2721A Spectrum Master Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

MS2721A

On Sale! Anritsu MS2711D HandHeld Spectrum Master Analyzer – AAATesters.com

Click for Product Info and Updated Pricing

Anritsu MS2711D Spectrum Analyzers

SKU: 9S43

Anritsu MS2711D HandHeld Spectrum Master Analyzer

Installed Options:
– 3: Colored Screen
– 5: Power Monitor
– 28: Interference Analyzer

Frequency Range: 100 Khz to 3.0 GHz

Anritsu MS2711D

Includes Carrying Case & Accessories As Listed Above!

MS-2711D MS 2711D

Anritsu MS2711D MS-2711D Spectrum Master Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

MS2711D

On Sale! Anritsu MS2711B HandHeld Spectrum Analyzer – AAATesters.com

Click for Product Info and Updated Pricing

Anritsu MS2711B Spectrum Analyzers

SKU: 9S39

Anritsu MS2711B HandHeld Spectrum Analyzer

Installed Option:
Option 8: Preamplifier

Frequency Range: 100 Khz to 3.0 GHz

Includes Carrying Case & Accessories As Listed

Anritsu MS2711B

MS2711B

MS 2711B MS-2711B

Anritsu MS2711B MS-2711B Spectrum Master Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

Buy, Sell, New, Used Anritsu MS2711B
Anritsu MS2711B Spec Sheet

On Sale! Anritsu MS2711D HandHeld Spectrum Master Analyzer – AAATesters.com

Click for Product Info and Updated Pricing

Anritsu MS2711D Spectrum Analyzers

SKU: 9S36

Anritsu Anritsu MS2711D HandHeld Spectrum Master Analyzer

Installed Options:
– 3: Color
– 21: Transmission Measurement
– 25: Interference Analyzer
– 27: Channel Scanner
– 29: Power Meter

Frequency Range: 100 Khz to 3.0 GHz

Anritsu MS2711D

Includes Carrying Case & Accessories As Listed

Anritsu MS2711D Spectrum Analyzer MS-2711D Spectrum Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.HandHeld Spectrum Master Analyzer

MS2711D

On Sale! Anritsu MS2721B HandHeld Spectrum Master Analyzer – AAATesters.com

Click for Product Info and Updated Pricing

Anritsu MS2721B Spectrum Analyzers

SKU: 9S31

Anritsu MS2721B HandHeld Spectrum Master Analyzer

Installed Options:
Option 25: Interference Analyzer
Option 27: Channel Scanner

Anritsu MS2721B

Frequency Range: 9 kHz to 7.1 GHz

Includes Original Factory Box, Carrying Case & Accessories As Listed

MS2721

Anritsu MS2721B MS-2721B Spectrum Master Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

MS2721B

On Sale! Anritsu MS2720T Spectrum Master Analyzer 20 GHz – AAATesters.com

Click for Product Info and Updated Pricing

Anritsu MS2720T Spectrum Analyzers

SKU: 9S30

Installed Options:
– Option 9: Demodulation Hardware
– Option 19: High Accuracy Power Meter
– Option 25: Interference Analyzer
– Option 27: Channel Scanner
– Option 31: GPS Receiver
– Option 720: Frequency Range 9 kHz to 20 GHz
– Option 880: GSM/GPRS/EDGE Measurements
– Option 881: W-CDMA/HSPA+ Measurements
– Option 883: LTE FDD/TDD Measurements

Anritsu MS2720T

Frequency Range: 9 kHz to 20 GHz

Includes Hard Carrying Case & Accessories As Listed

Anritsu MS2720T MS-2720T Spectrum Master Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.’

MS2720T

On Sale! Anritsu MS2711D HandHeld Spectrum Master Analyzer – AAATesters.com

Click for Product Info and Updated Pricing

Anritsu MS2711D Spectrum Analyzers

SKU: 9S29

Anritsu MS2711D HandHeld Spectrum Master Analyzer

Installed Options:
3: Colored Screen
21: Transmission Measurement
29: Power Meter

Anritsu MS2711D

Frequency Range: 100 Khz to 3.0 GHz

Includes Carrying Case & Accessories As Listed

Anritsu MS2711D MS-2711D Spectrum Master Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

MS2711D

On Sale! Anritsu MS2711D HandHeld Spectrum Master Analyzer – AAATesters.com

Click for Product Info and Updated Pricing

Anritsu MS2711D Spectrum Analyzers

SKU: 9S26

Anritsu MS2711D HandHeld Spectrum Master Analyzer

Installed Options:
– 3: Color Screen
– 6: Frequency Converter Control Module
– 10: Bias Tee
– 21: Transmission Measurement

Anritsu MS2711D

Frequency Range: 100 Khz to 3.0 GHz

Includes Carrying Case & Accessories As Listed

Anritsu MS2711D MS-2711D Spectrum Master Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

MS2711D